3.7.0 HP StorageWorks HP Scalable NAS File Serving Software administration guide - HP Scalable NAS 3.7 for Linux (AG513-96002, October 2009)

Dynamic volume properties
To see the configuration for a dynamic volume, select Storage > Dynamic Volume >
Volume Properties and then select the volume that you want to view. If a filesystem
is associated with the volume, the Volume Properties window shows information for
both the dynamic volume and the filesystem.
The Stripe State reported in the “Dynamic Volume Properties” section will be one of
the following:
• Unstriped. The volume is concatenated and striping is not in effect.
• Optimal. The volume has only one stripeset that includes all subdevices. Each
subdevice is written to in turn.
• Suboptimal. The volume has been extended and includes more than one stripeset.
The subdevices in the first stripeset will be completely filled before writes to the
next stripeset begin. To change the Stripe State to optimal, you will need to recre-
ate the dynamic volume.
HP Scalable NAS File Serving Software administration guide 109