3.6.1 HP PolyServe Software for Windows File Serving Administration Guide (T5392-96019, July 2008)

Table Of Contents

Chapter4:ConfigureVirtualCIFSServers 22

Create a Virtual CIFS Server

TocreateaVirtualCIFSServer,fromthePolyServeManagementConsole

selectMatrix>Add>AddVirtualCIFSServer.TheAddVirtualCIFS

Serverwindowthenappears.

Address:SpecifyeithertheIPaddressortheDNSnamethatwillbe

associatedwiththisVirtualCIFSServer.TheDNSnamemustalready

be

configuredintheDNSservice.

DNS/NetBIOSname:UsethisfieldtospecifyaDNS/NetBIOSname.

TheNetBiosnameiscalculatedfromtheDNSnamethatyouenterhere.If

DynamicDNSisenabledontheDNSserver,HPPolyServeSoftwarewill

addtheDNSnametotheDNSservice.If

not,youwillneedtoupdatethe

DNSserverwiththecorrespondinghostrecordfortheVirtualCIFS

ServerIPaddress.Thenameenteredinthisfieldcannotincludespaces.

Application:An“application”providesatagtogroupVirtualCIFS

ServersandVirtualFileSharesontheApplicationstab.Allof

the