3.6.1 HP PolyServe Matrix Server Event Notification Guide (T5392-96028, August 2008)

Chapter 3: Event Messages 37
17010 This matrix takes control of SAN failure resolved.
Action. None. Alert 17009 is resolved.
17011 Singleton matrix unable to take control of SAN. Possibly this server has not
been added to the matrix or has been deleted from the matrix, or possibly a
network failure has partitioned this server from the rest of the matrix. As a
result, some or all filesystem operations may be paused throughout the
matrix. In addition, filesystem mounts and unmounts and disk imports and
deports cannot be performed.
Action. Check the matrix configuration and add the server if it is not
currently a member. Also check the network connections and configuration
for the server to ensure that it can communicate with the rest of the matrix.
17012 Singleton matrix takes control of SAN failure resolved.
Action. None. Alert 17011 is resolved.
17013 This matrix unable to take control of SAN. As a result, some or all filesystem
operations may be paused throughout the matrix. In addition, filesystem
mounts and unmounts and disk imports and deports cannot be performed.
Action. Verify that the servers can access the membership partitions and
have write access to them. If a FibreChannel switch is configured in the
matrix, verify that the servers can communicate with it. If no problems are
found, contact HP Support.
17014 This matrix takes control of SAN failure resolved.
Action. None. Alert 17013 is resolved.
17015 Majority of membership partitions are unwritable, possibly due to a SAN or
storage hardware failure. As a result, disk imports and deports cannot be
done, and some servers may be unable to mount filesystems. In addition,
Matrix Server’s ability to recover from a future server failure is
compromised. Such a failure would leave Matrix Server no option but to
pause some or all filesystems throughout the matrix to preserve filesystem
integrity.
Action. The servers in the matrix cannot write to the majority of the
membership partitions. Ensure that the servers can access the membership
partitions and have write access to them. If the disks containing the
membership partitions have failed, you will need to recreate the partitions.
(See “Membership Partitions” in the PolyServe Matrix Server Administration
Guide for more information.)
ID Message and Corrective Action