3.6.1 HP PolyServe Matrix Server Event Notification Guide (T5392-96028, August 2008)

Chapter 3: Event Messages 35
13935 FenceAgent: disabled status being reported on <IP_address>.
Fabric fencing is configured and there is an operational problem with
the specified FibreChannel switch.
Action. Check the switch for faulting or failed components such as GBICs
and/or faulting slots.
13936 FenceAgent: disabled status being reported on <IP_address> resolved.
Action. None. Alert 13935 is resolved.
17001 Singleton matrix unable to take control of SAN, because the matrix that
includes NN.NN.NN.NN currently controls the SAN. Possibly this server
has not been added to the matrix or has been deleted from the matrix, or
possibly a networking failure or misconfiguration has partitioned this server
from the servers that control the SAN.
Action. Check the matrix configuration and add the server if it is not
currently a member. Also check the network to ensure that the server can
communicate with the rest of the matrix.
17002 Singleton matrix takes control of SAN failure resolved.
Action. None. Alert 17001 is resolved.
17003 This matrix unable to take control of SAN, because another matrix that
includes NN.NN.NN.NN currently controls the SAN. Possibly a networking
failure or misconfiguration has partitioned these servers from the servers
that control the SAN, or possibly this matrix has been misconfigured to
share membership partitions with another matrix.
Action. Check the matrix configuration and add the server if it is not
currently a member. If your site has more than one matrix, use mprepair to
make sure that this server is using the correct set of membership partitions.
17004 This matrix takes control of SAN failure resolved.
Action. None. Alert 17003 is resolved.
ID Message and Corrective Action