3.6.1 HP PolyServe Matrix Server Event Notification Guide (T5392-96028, August 2008)

Chapter 3: Event Messages 32
13915 Membership partition <partition> corrupt and must be repaired as soon as
possible.
Action. Use the mx config mp repair command or the Repair button on the
Storage Settings tab of the Configure Matrix Window to repair the partition
while the matrix is online. If the matrix is offline, use the mx config mp
repair command or resilver the partition with the mprepair utility.
13916 Membership Partition <partition> corruption resolved.
Action. None. Alert 13915 is resolved.
13917 IllegalDisks: One or more imported disks has more than 31 partitions.
Matrix Server only supports 31 partitions per disk. Some volume operations
may fail on partitions higher than this limit. See the Administrator's Guide
for further information.
Action. As of Matrix Server 3.4, the maximum number of partitions on a
disk or LUN is limited to 31. If you upgraded to Matrix Server 3.4, you may
have imported disks or LUNs with more than 31 partitions, and may have
created dynamic volumes using those higher-numbered partitions. The
higher-numbered partitions will continue to work correctly; however, you
should be aware of the following:
• A new volume cannot include subdevices having partition numbers
above 31. Existing volumes cannot be extended to include the higher-
numbered partitions.
• You will not be able to take a hardware snapshot of partitions with
numbers above 31.
• The Alert will remain until the disks containing more than 31 partitions
are deported.
13918 Too many partitions on disk resolved.
Action. None. Alert 13917 is resolved.
13921 VolImportError: unable to access imported volume <volume>.
Action. Check the state of all disks containing subdevices included in the
volume. If no problems are found, reboot the node.
13922 Unable to access imported volume <volume> resolved.
Action. None. Alert 13921 is resolved.
ID Message and Corrective Action