3.6.1 HP PolyServe Matrix Server Event Notification Guide (T5392-96028, August 2008)

Chapter 3: Event Messages 17
4558 Probe failed: <IP address> Server replied with error code: '<error>'
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host associated with the monitor. If the virtual host
was active on the affected server, it may have failed over to another server.
(Whether failover occurs is dependent on the configuration of the monitor
and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host for problems.
4559 Server reply resolved.
Action. None. Alert 4558 is resolved.
4560 Probe failed: <IP address> Invalid reply from server: ' <server>' was expecting
reply to contain '<reply>'
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host associated with the monitor. If the virtual host
was active on the affected server, it may have failed over to another server.
(Whether failover occurs is dependent on the configuration of the monitor
and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host for problems.
4561 Server reply resolved.
Action. None. Alert 4560 is resolved.
4562 Probe failed: <IP address> SNMP probe requires a valid SNMP URL.
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host associated with the monitor. If the virtual host
was active on the affected server, it may have failed over to another server.
(Whether failover occurs is dependent on the configuration of the monitor
and the virtual host.)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host for problems.
4563 Invalid SNMP URL resolved.
Action. None. Alert 4562 is resolved.
ID Message and Corrective Action