3.6.1 HP PolyServe Matrix Server Event Notification Guide (T5392-96028, August 2008)

Chapter 3: Event Messages 14
4540 Probe failed: <monitor> Partition to monitor is not specified.
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host(s) associated with the monitor. If the virtual
host(s) were active on the affected server, they may have failed over to
another server. (Whether failover occurs is dependent on the configuration
of the monitor and the virtual host(s).)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host(s) for problems.
4541 Partition to monitor resolved.
Action. None. Alert 4540 is resolved.
4542 Probe failed: <monitor> Partition could not be accessed.
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host(s) associated with the monitor. If the virtual
host(s) were active on the affected server, they may have failed over to
another server. (Whether failover occurs is dependent on the configuration
of the monitor and the virtual host(s).)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host(s) for problems.
4543 Partition access resolved.
Action. None. Alert 4542 is resolved.
4544 Probe failed: <monitor> Monitor timeout failed.
The monitor probe failed on the specified server. The server may no longer
be suitable for the virtual host(s) associated with the monitor. If the virtual
host(s) were active on the affected server, they may have failed over to
another server. (Whether failover occurs is dependent on the configuration
of the monitor and the virtual host(s).)
Action. Verify that the monitor is configured correctly. Check the server and
the network interface associated with the virtual host(s) for problems.
4545 Monitor timeout resolved.
Action. None. Alert 4544 is resolved.
ID Message and Corrective Action