3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 6: Configure Network Interfaces 63
Remove a Network Interface
This option can be useful when performing off-line configuration of a
server. To remove a network interface, select that interface on the Servers
window, right-click, and then select Delete.
You cannot delete a network interface that is up. If you need to remove a
network interface from an online server, first physically remove the
corresponding cable from the server. PanPulse will then report that the
network interface is down and you can perform the delete operation.
•The mx command to remove a network interface is as follows:
mx netif delete <interface_ip>