3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 18: Configure Device Monitors 252
Enable a Device Monitor
From the Management Console, select the device monitor to be enabled,
right-click, and select Enable.
To enable a device monitor from the command line, use this command:
mx device enable <devicename> <server> ...
Clear Device Monitor Error Condition
To clear a error from a device monitor, select that monitor, right-click, and
select Clear Last Error.
At the Command Prompt, use this command to clear the error condition:
mx device clear <devicename> <server> ...