3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 18: Configure Device Monitors 251
Available Servers/Selected Servers. The type of the device monitor
affects whether the monitor should be configured on one or multiple
servers.
• A GATEWAY monitor is multi-active and can be configured on
multiple servers.
•For
SHARED_FILESYSTEM monitors, you should select the servers that
mount the monitored filesystem and are running the applications that
access data from that filesystem.
•A
DISK monitor for a local device should typically be configured on
only one server.
•
CUSTOM monitors can be configured on one or more servers,
depending on the use of the monitor.
To specify servers from the command line, use this option:
--servers <server1>,<server2>,...
Other Configuration Procedures
These procedures can be performed from either the PolyServe
Management Console or the command line.
Delete a Device Monitor
From the Management Console, select the device monitor to be deleted,
right-click, and select Delete.
To delete a device monitor from the command line, use this command:
mx device delete <devicename> ...
Disable a Device Monitor
From the Management Console, select the device monitor to be disabled,
right-click, and select Disable.
To disable a device monitor from the command line, use this command:
mx device disable <devicename> <server> ...