3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 17: Configure Service Monitors 233
To disable a service monitor, select it on the Management Console, right-
click, and select Disable.
To disable a service monitor from the command line, use this command:
mx service disable <vhost:port> <server> ...
Enable a Previously Disabled Service Monitor
From the Management Console, select the service monitor to be enabled,
right-click, and select Enable.
To enable a service monitor from the command line, use this command:
mx service enable <vhost:port> <server> ...
Clear Service Monitor Errors
From the Management Console, select the service monitor where the
error occurred, right-click, and select Clear Last Error. To clear a monitor
error from the command line, use this command:
mx service clear <servicename> <netif> ...
The <servicename> is either the <vhost:port> for the service monitor or the
name of a custom monitor.