3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 14: Matrix Operations on the Applications Tab 182
• Add a service monitor.
• Enable or disable the virtual host.
• View or change the properties for the virtual host.
• Delete the virtual host.
To perform these procedures, left-click on the cell for the virtual host
(click in the Name column). Then right-click and select the appropriate
operation from the menu. See “Configure Virtual Hosts” on page 204 for
more information about these procedures.
Service and Device Monitors
You can perform the same procedures on the Application tab as are
available when right-clicking on a service monitor or device monitor on
the other tabs. The procedures are as follows:
• Delete the monitor
• Modify the configuration of the monitor
• Enable or disable the monitor on a specific server
• View or clear the last error
• Remove from server
To perform these procedures, left-click on the cell corresponding to the
monitor and server. Then right-click and select the appropriate operation
from the menu.
For more information about using these procedures on service monitors,
see “Add or Modify a Service Monitor” on page 223 and “Other
Configuration Procedures” on page 232.
For more information about using these procedures on device monitors,
see “Add or Modify a Device Monitor” on page 240 and “Other
Configuration Procedures” on page 251.