3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 14: Matrix Operations on the Applications Tab 174
The cells indicate whether a resource is deployed on a particular server,
as well as the current status of the resource. If a cell is empty, the resource
is not deployed on that server.
The icons used on the Applications tab report the status of the servers,
applications, and resources. The following icons are used in the server
columns to indicate the status of applications and resources. Servers also
use these icons when they are in a state other than Up/Okay.
Virtual hosts and single-active monitors use the following icons to
indicate the primary and backups. Multi-active monitors use the same
icons but do not include the primary or backup indication. The green
arrow changes as shown above when the status of the virtual host or
monitor changes. The green dot changes color as the status changes.
When an error occurs on a single-active monitor, a red E is added to the
green dot. The monitor will stop running until the error is cleared.
To clear the error, right-click in the server cell for the monitor and select
Clear last error.
Application States
The Application tab provides a summary of the state of the applications
and allows you to quickly drill-down within an application to locate
resources that are down or experiencing problems.
Up/Okay
Starting
Stopping
Down
Unknown