3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 13: Configure Event Notifiers and View Events 168
Test Notifier Services
The configuration tabs for the SNMP, email, and script notification
services contain a Test button that verifies that events can be sent to the
configured notification service. An error will be reported if the service is
disabled or is not configured.
Enable or Disable a Notifier Service
The tabs used to configure the notifier services also have a checkbox to
disable the services. Use this checkbox to disable/enable the services as
necessary.
To enable or disable a notifier service from the command line, use these
commands:
mx eventnotifier enable [--snmp] [--email] [--script]
mx eventnotifier disable [--snmp] [--email] [--script]
Restore Notifier Event Settings to Default Values
By default, Matrix Server configures the notification services with the
event IDs that appear as Alerts on the PolyServe Management Console.
Click the Restore Default button on the Event Definition to remove any
customizations you have made and return the event ID configuration to
the original Matrix Server settings.
Select the event notifier services that should be restored to the defaults on
the following window.
To restore event settings from the command line, use this command:
mx eventnotifier restoreevents [--snmp] [--email] [--script]