3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 13: Configure Event Notifiers and View Events 163

To add or remove notifier events from the command line, use these

commands. If you do not specify a service, the events will be added or

removed from all services. You can specify individual event IDs or a

range of IDs to be added. Use commas to separate the values, for

example: 100, 300-400,555.

mx eventnotifier addevents [--snmp] [--email] [--script] <event

IDs or ID range>

mx eventnotifier removeevents [--snmp] [--email] [--script]

Configure the SNMP Notifier Service

To configure the SNMP notifier service, select the SNMP Trap

Forwarding Settings tab. This tab contains an SNMP Trap Forwarding

Table that specifies the IP address and community string needed to access

SNMP targets. You can configure up to 32 targets.

To define a new SNMP trap forwarding target, click Add New Target.