3.6.1 HP PolyServe Matrix Server Administration Guide (T5392-96018, August 2008)

Chapter 8: Configure Dynamic Volumes 91
Select the dynamic volumes that you want to deport and click the Deport
icon in the toolbar.
To deport dynamic volumes from the command line, use this command:
mx dynvolume deport <volumeName> ...
Import a Dynamic Volume
When a dynamic volume is imported, the unimported LUNs associated
with the volume will be imported and the psv binding, which Matrix
Server uses to control access to the dynamic volume, will be created.
NOTE: When you reimport a dynamic volume, the psv name assigned to
the volume may be different from the psv name used by the
volume before it was deported. Matrix Server does not reserve the
psv name originally used by the volume, and may instead assign
it to another volume.
To import a dynamic volume, select Storage > Dynamic Volume > Import
Volume.