3.6.0 MxFS for CIFS Administration Guide (5697-7082, December 2007)

Chapter 4: Configure MxFS for CIFS with Virtual CIFS Servers 18

If MxFS for CIFS detects that a Virtual File Share can no longer be

accessed on the primary node, by default Matrix Server will fail over the

associated Virtual CIFS Server to one of the designated backup nodes.

Clients then access the Virtual CIFS Server’s Virtual File Shares from that

node. Because the files associated with the Virtual File Shares are located

on a PSFS cluster filesystem, the backup node can immediately access the

data.

By default, the Virtual CIFS Server will remain active on the backup node.

However, you can customize the failover and failback behavior. For

example, after access to the Virtual File Share is restored on the original

node, you may want the Virtual CIFS Server to fail back to that node.

CIFS clients use a Virtual CIFS Server to access file share

data1

Ethernet

FC Fabric

Disk Array

VFS1

Backup2

file share

data1

VFS1

Backup1

file share

data1

VFS1

Primary

file share

data1

Matrix Server

\data1

filesystem