3.6.0 MxFS for CIFS Administration Guide (5697-7082, December 2007)

Chapter 3: Configure MxFS for CIFS with Matrix File Shares 16

[--enabled|--disabled]

[--active|--inactive]

Remove a Matrix File Share from a Server

This procedure removes the selected server from the configuration of the

Matrix File Share. Select the Matrix File Share on the Servers tab,

right-click, and select Remove From Server. (On the Applications tab,

right-click in the cell for the server from which the Matrix File Share is to

be deleted.)

Matrix File Share Monitors

Disable or Enable a Matrix File Share Monitor

To disable a Matrix File Share monitor on a particular node, select it on

the Servers tab, right-click, and select Disable. (On the Applications tab,

right-click in the server cell corresponding to the Matrix File Share.)

To reenable the monitor, select it on the PolyServe Management Console,

right-click, and select Enable.

You can also enter the following at the Command Prompt:

mx mfs enable <mfs_name> [ALL_SERVERS|<server> ...]

mx mfs disable <mfs_name> [ALL_SERVERS|<server> ...]

View Errors

To view the last error for a Matrix File Share monitor, select the file share

on the Servers tab, right-click, and select View Last Error. (On the

Applications tab, right-click in the server cell corresponding to the Matrix

File Share.)