3.6.0 Matrix Server Release Notes (5697-7087, February 2008)

PolyServe Matrix Server Release Notes 17

13996 mx fs destroy partially destroys snapshots

Do not use the mx fs destroy command to remove a snapshot. If

you attempt to delete a snapshot with the mx fs destroy

command, the snapshot filesystem will be removed but the

snapshot will remain on the array. You will then need to

manually remove the snapshot LUNs from the array. (After

removing the LUNs, you will see disk import errors on the

console for the LUNs that were removed.)

If you need to delete a snapshot, either use the mx snapshot

destroy command or locate the snapshot on the PolyServe

Management Console, right-click, and select Delete.

14219 lanman IRPStackSize Is Too Small

After installing applications that use the IRP stack (such as some

AntiVirus software), you may see error messages indicating that

the value of the lanman IRPStackSize parameter needs to be

increased. This problem has also been seen when upgrading

Matrix Server from a release earlier than 3.4. (Matrix Server uses

an additional IRP stack in release 3.4 and later.)

The error messages are as follows:

Not enough server storage is available to process this

command.

Not enough memory to complete transaction. Close some

applications and retry.

Event ID : 2011

Source : Srv

Description: The Server's configuration parameter

"IRPStackSize" is too small for the server to use a

local device. Please increase the value of this parameter.

The following Microsoft Knowledge Base article explains how

to resolve this problem:

http://support.microsoft.com/?scid=kb;en-us;177078

It is recommended that the IRPStackSize be raised by

increments of 1 until the error is resolved.

Bug

Description