3.6.0 Matrix Server Command Reference (5697-7083, December 2007)

Chapter 3: mx Commands 60
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
disable—Disable an application
mx application disable <application_name> <server>
enable—Enable an application
mx application enable <application_name> <server>
rename—Rename an application
mx application rename <current_name> <new_name>
status—Show status for an application
mx application status [--severity OK|WARNING|ERROR] [<application> ...]
mx config – matrix configuration commands
Use the following mx config commands to configure the matrix.
NOTE: If you are performing the initial configuration of a matrix, the mx
config, mx config mp, and mx config snapshot commands must be
entered in a specific order. See Appendix A in the PolyServe Matrix
Server Installation Guide for more information.
rename Rename an application
status Show the status of applications
Command Description
check Check the matrix configuration
description Set the cluster description
dump Dump the matrix configuration
export Export the matrix configuration
fcfencing Select FibreChannel as the fencing method
fcswitch Configure a FibreChannel switch into the matrix
import Import the matrix configuration
license Install the matrix license
list Get the matrix configuration
protocol Set the administrative traffic protocol
santest Test the switch configuration
Command Description