3.6.0 Matrix Server Command Reference (5697-7083, December 2007)

Chapter 2: Matrix Server Commands 22

mxcollect.exe – collect configuration information

Synopsis

tools\mxcollect

Description

This utility collects configuration information and log files from the matrix.

The utility is typically run under the direction of HP Support.

You will need to run the mxcollect utility on each node. The utility is located

in the %ProgramFiles%\PolyServe\MatrixServer\tools folder. Go to this

location and double-click the file mxcollect.exe. You will then see a command

window that says “Collecting files.” The information collected from that node

is written to the file mxcollect_machinename_yyyymmdd_hhmmss_default.zip.

This file is placed in the folder %SystemDrive%\Program

Files\PolyServe\MatrixServer\conf\mxcollect.

mxconsole.exe – start the Management Console

Synopsis

bin\mxconsole

Description

The mxconsole command starts the PolyServe Management Console, which

is used to configure and monitor the matrix. The console can be run from

either a matrix server or a local machine outside the matrix. See the PolyServe

Matrix Server Administration Guide for more information about the console.

mxgenpass.exe – create encrypted passwords

Synopsis

bin\mxgenpass

Description

This command can be used to create encrypted passwords for use in the

.matrixrc file. For an example of using this command, see

“Encrypted

passwords in the .matrixrc file” on page 54.