3.6.0 Matrix Server Command Reference (5697-7083, December 2007)

Chapter 2: Matrix Server Commands 18

After making changes with mprepair, you will need to export the

configuration to the other servers in the matrix. To do this, start Matrix Server

on the server where you ran mprepair and then select the Configure option

on the Matrix Server Connect window. When the Configure Matrix window

appears, select the Matrix Wide Configuration tab. Select the other servers in

the Address column and then click Export.

mprepair Options

Matrix Server can operate with either one membership partition or three

membership partitions. To ensure that a membership partition is always

available, we recommend that you use three membership partitions.

Display Membership Partitions. To display information about membership

partitions, type the following command:

mprepair --display_mplists

The output shows the local membership partition list on the server where you

are running mprepair. It then compares this list with the lists located on the

disks containing the membership partitions. The output also includes the

device database records for the disks containing the membership partitions.

Following is an example.

###################################################################

Local membership partition list:

-------------------------------------------------------------------

Membership partition list --

UID/Part:20:00:00:04:cf:13:33:12::0/1 Local Path:\\.\Global\psd1p1

Status:OK (active) Size:8001Kb

These membership partitions contain a membership partition list

which matches the local membership partition file list:

UID/Part:20:00:00:04:cf:13:33:12::0/1

###################################################################

Contents of UID/Part:20:00:00:04:cf:13:33:12::0/1 --

Disk records:

Recid 1: 20:00:00:04:cf:13:33:12::0 psd1

Recid 258: 20:00:00:04:cf:13:3c:92::0 psd2

Host registry entries:

Host ID: 10.10.30.4 fencestatus=0

SAN Loc:10:00:00:00:c9:2d:27:7d::0 idstatus=0 (switch=fcswitch5)

Host ID: 10.10.30.3 fencestatus=0

SAN Loc:10:00:00:00:c9:2d:27:78::0 idstatus=0 (switch=fcswitch5)