3.6.0 Matrix Server 3.6.0 Administration Guide (5697-7081, December 2007)

Chapter 6: Configure Network Interfaces 61

Remove a Network Interface

This option can be useful when performing off-line configuration of a

server. To remove a network interface, select that interface on the Servers

window, right-click, and then select Delete.

You cannot delete a network interface that is up. If you need to remove a

network interface from an online server, first physically remove the

corresponding cable from the server. PanPulse will then report that the

network interface is down and you can perform the delete operation.

•The mx command to remove a network interface is as follows:

mx netif delete <interface_ip>