3.6.0 Matrix Server 3.6.0 Administration Guide (5697-7081, December 2007)

Chapter 17: Configure Device Monitors 225
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
Enable a Device Monitor
From the Management Console, select the device monitor to be enabled,
right-click, and select Enable.
To enable a device monitor from the command line, use this command:
mx device enable <devicename> <server> ...
Clear Device Monitor Error Condition
To clear a error from a device monitor, select that monitor, right-click, and
select Clear Last Error.
At the Command Prompt, use this command to clear the error condition:
mx device clear <devicename> <server> ...