3.6.0 Matrix Server 3.6.0 Administration Guide (5697-7081, December 2007)

Chapter 14: Matrix Operations on the Applications Tab 175

reordered as necessary. If the monitor was multi-active, it will remain

active on any other servers on which it is configured.

Menu Operations

Applications

The following operations affect all entities associated with a Matrix

Server application. These operations can also be performed from the

command line, as described in the PolyServe Matrix Server Command

Reference.

Rename an application: Right-click on the application cell (in the Name

column) and then specify the new name on the Rename Application

dialog.

Enable an application on a server: Left-click on the cell corresponding to

the application and server. Then right-click and select Enable.

Disable an application on a server: Left-click on the cell corresponding

to the application and server. Then right-click and select Disable.

Servers

To add a resource such as a service or device monitor to a server, left-click

in the cell for that server and resource, right-click, and select Add To

Resource.

To remove a resource such as a service or device monitor from a server,

left-click in the cell for that server and resource, right-click, and select

Remove From Server.

Virtual Hosts

When you right-click on a virtual host, you can perform the same

operations as are available on the Servers or Virtual Hosts tab.

• Re-host, or move, the virtual host to another node in the matrix.