3.6.0 Matrix Server 3.6.0 Administration Guide (5697-7081, December 2007)

Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
3
2
Quick Start Checklist
The following checklist is intended for new installations of Matrix Server
and includes typical steps to configure the matrix.
Matrix Configuration Steps
The following checklist assumes that the installation and configuration
steps described in the PolyServe Matrix Server Installation Guide have been
completed
.
Action Description
Review
administrative
considerations and
restrictions.
The considerations and restrictions describe best
practices and requirements for using Matrix Server.
See “Administrative Considerations and
Restrictions” on page 18.
Set up administrative networks for Matrix Server
Configure network
interfaces.
Specify the networks that you prefer to use for
Matrix Server administrative traffic. You can also
disable interfaces for virtual hosts. See “Configure
Network Interfaces” on page 55.
Prepare PSFS filesystems
Import disks into the
matrix.
The disks to be used for PSFS filesystems must be
imported to enable the matrix to control access to
them. See “Import SAN Disks” on page 65.