3.5.1 Matrix Server Installation Guide (June 2008)

Appendix E: Configure the Matrix from the Command Line 83
After you select OK, the Membership Partition Setup window shows the
partitions on the disk or LUN. Use the arrow keys to move among the
partitions. When a partition is highlighted, its size is displayed at the
bottom of the window. To select a partition to be used as a membership
partition, move to that partition and then press the spacebar. The
minimum size for a membership partition is 100 MB.
Membership Partition Setup
No partitions currently selected.
Select one or three disk partitions to use as membership
partitions.
Select a disk to see a list of partitions on that disk.
< OK > <Cancel>
UID:20:00:00:20:37:e4:f8:78::0 switch fcswitch6 port 0
UID:20:00:00:20:37:e4:f8:4a::0 switch fcswitch6 port 0
UID:20:00:00:20:37:e4:f8:75::0 switch fcswitch6 port 0
UID:20:00:00:20:37:e4:f8:77::0 switch fcswitch6 port 0
UID:20:00:00:20:37:e4:f7:f8::0 switch fcswitch6 port 0
Help Display help
Membership Partition Setup
No partitions currently selected.
Select one or three disk partitions to use as membership
partitions.
Select from the following partitions found on disk
UID:20:00:00:20:37:e4:f8:78::0
< OK > <Cancel>
[ ] Partition:1 Path:/dev/sdc1
[ ] Partition:2 Path:/dev/sdc2
[ ] Partition:3 Path:/dev/sdc3
[ ] Partition:4 Path:/dev/sdc4