3.5.1 Matrix Server Installation Guide (June 2008)

Appendix E: Configure the Matrix from the Command Line 77
Blade Slot. If you are using an IBM BladeCenter server, specify the slot
number for this server.
Fencing Action. When a server needs to be restricted from the SAN,
Matrix Server can either power-cycle the server or shut it down. Specify
the method that you want to use on the following window.
Remote Management Controller Access. Matrix Server needs to log into
a user account on the Remote Management Controller in order to fence
the server. The account must currently exist on the Remote Management
Controller. Specify the user name for the account that you want Matrix
Server to use.
IBM BladeCenter
Enter the blade number of the server
< OK > <Cancel>
Remote Management Controller Fencing Action
Select the action Matrix Server will take to fence a server
< OK > <Cancel>
Reset Power cycle the fenced server
Power-Down Remove power to fenced server