3.5.1 Matrix Server Installation Guide (June 2008)

Appendix E: Configure the Matrix from the Command Line 76
IP Delta. Specify the delta to add to each server’s IP address to determine
the IP addresses of the associated Remote Management Controllers. For
example, if your servers are 1.255.200.12 and 1.255.200.15 and their
Remote Management Controllers are 1.255.201.112 and 1.255.201.115,
enter 0.0.1.100 as the delta.
Hostname/IP Address. Specify either the hostname or IP address for the
Remote Management Controller associated with the server to which you
are connected.
Remote Management Controller IP Delta
Enter the delta to add to each server's primary IP address to
determine the associated remote management controller IP address
Example: If your servers are 1.500.200.12 and 1.500.200.15, and
their remote management controllers are 1.500.201.112 and
1.500.201.115, respectively, enter "0.0.1.100" (without quotes)
< OK > <Cancel>
Remote Management Controller Configuration
Enter the hostname or IP address of the remote management
controller associated with this server.
You will be required to enter this information for other servers
in the cluster when the configuration is exported or imported to
them.
< OK > <Cancel>