3.5.1 Matrix Server Installation Guide (June 2008)

Chapter 2: Install Matrix Server and MxFS-Linux 34
3. Apply the configuration. When you have completed your entries on
the Storage Configuration tab, click Apply (at the bottom of the Matrix
Configuration window). You will then see a message stating the
operation will erase all of the data on the membership partitions. Click
Yes to continue.
The configuration is then installed on the server that you are using to
connect to the Management Console. You will then be asked whether
you want to start the matrix on that server. If you configured Web
Based Management Fencing, answer No. Otherwise, answer Yes.
Go to the Matrix-Wide Configuration tab.
Matrix-Wide Configuration Tab
This tab is used to export the matrix configuration to the other servers
that will be in the matrix. It can also be used to start or stop Matrix Server
on specific servers and to test the fencing configuration.