3.5.1 Matrix Server Installation Guide (June 2008)

Chapter 2: Install Matrix Server and MxFS-Linux 33
NOTE: Snapshots are supported on Engenio storage arrays and
Hewlett-Packard StorageWorks Enterprise Virtual Array
(EVA) storage arrays. The appropriate Engenio or HP software
must be installed as described under step “16. Install
Hardware Snapshot Software (Optional)” on page 19.
To configure the snapshot method, click Add in the Snapshot
Configuration section of the window, select the appropriate
configuration module, and then supply the configuration information.
If you are using an Engenio array, you will be asked for the hostnames
or IP addresses and password for your storage array controllers.
If you are using an HP EVA array, you will be asked for the hostname
and authentication information for the management appliance.