3.5.1 Matrix Server Installation Guide (June 2008)

Chapter 2: Install Matrix Server and MxFS-Linux 26
1. Remote Management Controller Vendor. Select the vendor for your
Remote Management Controllers. For an IBM Blade Center, also
specify the Blade slot.
2. If you will be using IPMI as the fencing method, you should be aware
that only one IPMI session can be active at a time. Matrix Server will
fail to fence a server if another IPMI session is already active on that
server at the time that the fencing attempt is made.
3. Remote Management Controller ID. Specify how Matrix Server
should identify the Remote Management Controller associated with
each server. Use one of the following methods.
– Enter the hostname or IP address for the Remote Management
Controller associated with this matrix server. You will need to use