3.5.1 Matrix Server Installation Guide (June 2008)

Chapter 2: Install Matrix Server and MxFS-Linux 24

Select your storage type and, for FibreChannel, specify the fencing

method that you want to use. (ISCSI storage must use web management-

based fencing.)

FibreChannel Switch-Based Fencing

Complete the following on the SAN & Fencing tab:

1. SAN Switches. Specify the hostnames or IP addresses of the

FibreChannel switches that are directly connected to the nodes in the

matrix. Click Add, and then specify the hostname or IP address of the

first FC switch. Repeat this procedure to specify the remaining FC

switches, including cascading switches.