3.5.1 Matrix Server Command Reference

Chapter 1: Matrix Server Commands 51

Show available volumes

The -v option lists available volumes on imported disks. These volumes are

not currently in use for a PSFS filesystem or a membership partition.

# sandiskinfo -v

Volume: /dev/psd/psd5p1 Size: 3905M

Disk=20:00:00:04:cf:13:32:d1::0 partition=01 type=Linux (83)

Volume: /dev/psd/psd5p2 Size: 7386M

Disk=20:00:00:04:cf:13:32:d1::0 partition=01 type=Linux (83)

Options for dynamic volumes

The following sandiskinfo options apply only to dynamic volumes.

Show available subdevices

The --subdevices option lists subdevices that are available for use in

constructing a dynamic volume.

sandiskinfo --subdevices

Subdevice: 20:00:00:04:cf:13:38:18::0/2 Size: 1950M psd1p2

Subdevice: 20:00:00:04:cf:13:38:18::0/7 Size: 490M psd1p7

Subdevice: 20:00:00:04:cf:13:38:18::0/8 Size: 490M psd1p8

Subdevice: 20:00:00:04:cf:13:38:18::0/9 Size: 490M psd1p9

Subdevice: 20:00:00:04:cf:13:38:18::0/10 Size: 490M psd1p10

Subdevice: 20:00:00:04:cf:13:38:18::0/11 Size: 490M psd1p11

Subdevice: 20:00:00:04:cf:13:38:18::0/12 Size: 490M psd1p12

Subdevice: 20:00:00:04:cf:13:38:18::0/13 Size: 490M psd1p13

Subdevice: 20:00:00:04:cf:13:38:18::0/14 Size: 490M psd1p14

Show dynamic volumes

The --dynvolumes option lists all dynamic volumes.

sandiskinfo --dynvolumes

Dynamic Volume: psv1 Size: 2439M Stripe=Unstriped

Dynamic Volume: psv2 Size: 490M Stripe=32K

Dynamic Volume: psv3 Size: 490M Stripe=8K

Show properties for dynamic volumes

The --dynvol_properties [volname] option lists detailed properties for the

specified dynamic volumes. volname is the psv name, such as psv2. If this

option is omitted, the properties for all dynamic volumes are displayed.

sandiskinfo --dynvol_properties

Dynamic Volume: psv1 Size: 2439M Stripe=Unstriped