3.5.1 Matrix Server Command Reference

Chapter 1: Matrix Server Commands 49
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
-s [+]size[K|M|G|T]
The following example increases the size of the filesystem by 1 GB.
resizepsfs -s +1G /dev/psd/psd6p4
sandiskinfo – show SAN disk/LUN information
Synopsis
/opt/polyserve/bin/sandiskinfo [-i|-u|-v|-f] [-alr] [-U]
[-q]
[--subdevices] [--dynvolumes] [-
-dynvol_properties [volname]]
Description
The sandiskinfo command can display information for both imported and
unimported SAN disks (or LUNs) and also for dynamic volumes. Under
normal operations, the sandiskinfo output should be the same on all servers
in the matrix.
Disk information
With no options, sandiskinfo displays the UID, vendor, model, and capacity
of each imported disk and specifies the FC switch used to access the disk.
# sandiskinfo
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
Following are commonly used options for imported and unimported disks:
sandiskinfo [-i|-u|-v|-f] [-alr] [-U] [-q]
The options are:
-i Display information for imported disks (the default).
-u Display information for unimported disks.
-v Display available volumes.
-f Display PSFS filesystem volumes.
-a Display all information; for -v, display all known volumes.
-l Additionally display host-local device name.
-r Additionally display local device route information.