3.5.1 Matrix Server Command Reference

Chapter 1: Matrix Server Commands 42
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
This option also reports the exit value:
0 – enabled
1 – not enabled
2 – could not open or read disk
3 – a bad argument was specified
--version
Display the version of the on-disk filesystem format.
--blocksize
Display only the block size used by the filesystem.
--verbose, -v
Enable verbose messages.
psfslabel – label a PSFS filesystem
Synopsis
/opt/polyserve/bin/psfslabel <device> “<label>”
Description
The psfslabel command adds a label to the specified device.
psfsquota – manage disk quotas
Synopsis
/opt/polyserve/sbin/psfsquota [--enable-quotas]
[--disable-quotas] [--set-udq <size>[T|G|M|T]] [--set-gdq
<size>[T|G|M|T]] [-y] <device>
Description
The psfsquota command can be used to enable or disable quotas on a
filesystem and to set the default quota for users and groups.
device is a psd or psv device and is specified as follows:
• For a psd device partition, the device is specified as
/dev/psd/psdXXXpYY, where XXX is the drive number and YY is the
partition number. For example, /dev/psd/psd6p4 specifies partition 4 on
disk psd6.