3.5.1 Matrix Server Command Reference

Chapter 1: Matrix Server Commands 34
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
mxsetfence – configure fencing
Synopsis
/opt/polyserve/bin/mxsetfence <fence_agent>
Description
The mxsetfence command is used in conjunction with the mxfencecfg
command to configure flexible fencing without running mxconfig.
The mxsetfence command is run first, and initializes the fence configuration
file /etc/opt/polyserve/fence.conf. It also creates the symbolic link
/opt/polyserve/bin/mxfencecfg, which is linked to the fence configuration
utility for the specified fence agent.
The fence agents are:
fcsan
Fabric fencing.
webmgmt
Server-based fencing.
After running mxsetfence, you will need to configure the fence agent with
mxfencecfg. See “mxfencecfg – configure the fence agent” on page 14.
mxsetsecret – set the network secret password
Synopsis
/opt/polyserve/bin/mxsetsecret -f [--filename] <filename> <secret>
Description
This command is typically run by mxconfig and should be run manually only
at the request of PolyServe personnel.
pmxs – start or stop Matrix Server or view status
Synopsis
/etc/init.d/pmxs start
/etc/init.d/pmxs stop
/etc/init.d/pmxs restart
/etc/init.d/pmxs status