3.5.1 Matrix Server Command Reference

Chapter 1: Matrix Server Commands 4

lcl-dump – show information about LCL locks

Synopsis

/opt/polyserve/tools/lcl-dump

Description

This command should be run only at the request of PolyServe personnel.

log_collect – obtain log files

Synopsis

/opt/polyserve/tools/log_collect

Description

This command is used internally by the mxcollect utility and should not be

run directly.

mkpsfs – create a PSFS filesystem

Synopsis

/opt/polyserve/sbin/mkpsfs [-q] [-y] [-n <max-nodes>]

[-l <label>] [-o [option...]] <device> [<block-count>]

Description

The mkpsfs command creates a PSFS filesystem on the specified device,

which must be imported into the matrix.

device is a psd or psv device and is specified as follows:

• For a psd device partition, the device is specified as

/dev/psd/psdXXXpYY, where XXX is the drive number and YY is the

partition number. For example, /dev/psd/psd6p4 specifies partition 4 on

disk psd6.

• For a non-partitioned psd device, the device is specified as

/dev/psd/psdXXX, where XXX is the drive number. For example,

/dev/psd/psd5.

• For a psv device, the device is specified as /dev/psv/psvXXX, where XXX

is the volume number. For example, /dev/psv/psv1.