3.5.1 Matrix Server Administration Guide

Chapter 5: Configure the SAN 72
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
Following are some examples of these options.
Show Partition Information
The -a option lists the partitions on each disk. When combined with -u, it
displays partition information for unimported disks.
# sandiskinfo -a
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
Show Local Device Information
The -l option displays the local device name for each disk, as well as the
default disk information. When combined with -u, it displays local device
names for unimported disks.
# sandiskinfo -al
Disk: /dev/psd/psd5
Uid: 20:00:00:04:cf:13:32:d1::0 SAN info: switch fcswitch port 7
Vendor: SEAGATE ST336704FC Capacity: 34732M
Local Device Path: /dev/sda
partition 01: size 3905M type Linux (83)
partition 02: size 813M type Linux (83) (PSFS Filesystem)
partition 03: size 7813M type Linux (83) (Membership Partition)
-v Display available volumes.
-f Display PSFS filesystem volumes.
-a Display all information; for -v, display all known volumes.
-l Additionally display host-local device name.
-r Additionally display local device route information.
-U Display output in the format used by the Management Console.
This option is used internally by Matrix Server and does not
produce human-readable output.
-q Suppress output of all log messages.