3.5.1 Matrix Server Administration Guide

Chapter 2: Matrix Administration 40

For example, on SLES9, locate the line in the /etc/init.d/nfs script

beginning with “# Required-Start:” and add pmxs to the end of the line.

Change:

# Required-Start: $network $portmap

to:

# Required-Start: $network $portmap pmxs

Back Up and Restore the Configuration

It is important to back up the matrix configuration whenever changes are

made. You can then easily restore the matrix if necessary.

Matrix Server Configuration

PolyServe recommends that you back up Matrix Server whenever the

matrix configuration or the membership partitions are changed. You

should make separate backups for each node in the matrix.

The Matrix Server configuration files are in the /etc/opt/polyserve and

/var/opt/polyserve directories. You can back up either the entire directories

or the following individual files.

Also be sure to back up your custom scripts and notifiers.

It is possible to save much of the matrix configuration with the mx matrix

dump command. See the PolyServe Command Reference for more

information.

/etc/opt/polyserve /var/opt/polyserve

•cp_conf •mxsecret •FCswitches

• fc_pcitable • oem.conf • MPdata

• fence.conf • psSan.cfg • run/MP.backup

•licenses/license •scl.conf

•mxinit.conf •snap.conf

•mx_passwd