3.5.1 Matrix Server Administration Guide

Chapter 1: Introduction 17
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
iSCSI Configuration
This example shows an iSCSI configuration. The iSCSI initiator is
installed on each server. Ideally, a separate network should be used for
connections to the iSCSI storage arrays. (iSCSI configurations are
supported only on SLES9 systems.)
Server
1
Server
2
Server
4
Server
5
Server
6
iSCSI Array iSCSI Array
Server
3
Network Switch