3.5.1 Matrix Server Administration Guide

Chapter 18: SAN Maintenance 298
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
When you select a disk, the partitions on that disk are displayed. To select
a partition, move to that partition and press the spacebar. Information
about the partition then appears at the bottom of the window. A 100-MB
partition is adequate.
The partition you selected is displayed on the Membership Partition
Setup window. If you want to use three membership partitions, repeat
this procedure to select the additional membership partitions. We
recommend that the partitions be on different disks. You can deselect and
reselect partitions as necessary. To complete the operation, select Done.