3.5.1 Matrix Server Administration Guide

Chapter 17: Advanced Monitor Topics 274

exit non-zero. The service could then become active on another server,

causing the Stop script to run on the original server even though the Start

script had not completed successfully.

When you add Start and Stop scripts to a service or device monitor, you

can set a timeout period for each script.

Script Environment Variables

When you specify a script for a service or device monitor, Matrix Server

sets the following environment variables for that script.

MX_METHOD=(START|STOP|RECOVER|PROBE)

The type of script (Start, Stop, Recovery, or probe).

MX_ACTIVE_STATE=(ACTIVE|INACTIVE)

Whether the script is being run on an active instance of the object. For

example, if a service-monitor script is being run on the server that

currently has the active virtual host, its state will be

ACTIVE. For

device-monitor scripts, the state is

ACTIVE if the monitored device is

active on the server running the script.

MX_SERVER=IP address

The primary address of the server that calls the script. The address is

specified in dotted decimal format.

MX_TYPE=(SERVICE|DEVICE)

Whether the script is for a service or device monitor.

MX_VHOST=IP address

The IP address of the virtual host. The address is specified in dotted

decimal format. (Applies only to service monitors.)

MX_PORT=Port or name

The port or name of the service monitor. (Applies only to service

monitors.)

MX_NAME=name

The name of the device monitor. (Applies only to device monitors.)