3.5.1 Matrix Server Administration Guide

Chapter 14: Configure Device Monitors 242

decimal IP address of the hostname for the server, and <monitor_name>

is the name assigned to the

SHARED_FILESYSTEM device monitor.

The following example shows a

monitor created on the server r18.

To add a device monitor from the command line, use this command:

mx device add

--type <type>

--servers

server1

>,<

server2

>,...

[--application <application>] [--timeout <seconds>]

[--frequency <seconds>] [--parameters <parameters>] [other-

arguments] <devicename> ...

To update a device monitor from the command line, use this command:

mx device update [--application <application>] [--timeout

<seconds>][--frequency < seconds>][--parameters < parameters>]

[other-arguments] <devicename> ...

See “Advanced Settings for Device Monitors” for information about the

other arguments that can be used for device monitors.

Advanced Settings for Device Monitors

You can use the advanced settings to fine-tune device monitors. To access

the advanced settings, select the Advanced button on the Add Device

Monitor or Device Monitor Properties window.