3.5.1 Matrix Server Administration Guide

Chapter 11: Matrix Operations on the Applications Tab 202

reordered as necessary. If the monitor was multi-active, it will remain

active on any other servers on which it is configured. (The device

monitor cannot be removed via drag and drop if it is configured on

only one server.)

Menu Operations

Applications

The following operations affect all entities associated with a Matrix

Server application. These operations can also be performed from the

command line, as described in the PolyServe Command Reference.

Rename an application: Right-click on the application cell (in the Name

column) and then specify the new name on the Rename Application

dialog.

Enable an application on a server: Left-click on the cell corresponding to

the application and server. Then right-click and select Enable.

Disable an application on a server: Left-click on the cell corresponding

to the application and server. Then right-click and select Disable.

Servers

To add a resource such as a service or device monitor to a server, left-click

in the cell for that server and resource, right-click, and select Add To

Resource.

To remove a resource such as a service or device monitor from a server,

left-click in the cell for that server and resource, right-click, and select

Remove From Server.