3.5.1 Matrix Server Administration Guide

Chapter 6: Configure Dynamic Volumes 91
Copyright © 1999-2007 PolyServe, Inc. All rights reserved.
another location. The filesystem must be unmounted when you recreate
the volume.
To recreate a dynamic volume on the Management Console, select
Storage > Dynamic Volume > Recreate Volume and then choose the
volume that you want to recreate.
If a filesystem is mounted on the volume, the Recreate Dynamic Volume
window shows information for both the dynamic volume and the
filesystem.
You can change or reorder the subdevices used for the volume and enable
striping if desired.
To recreate a volume from the command line, run the dynvolume destroy
command and then run the dynvolume create command.