3.4.0 MxFS for CIFS Administration Guide

Chapter 2: Configure CIFS with Matrix File Shares 14

Other Procedures

Matrix File Shares

Modify the Configuration of a Matrix File Share

To change the configuration of a Matrix File Share, select it on the Servers

or Applications tab, right-click, and select Properties. You can then

modify the configuration as necessary.

You can also enter the following at the Command Prompt:

mx mfs update [arguments] [--path <path>] [--servers

ALL_SERVERS|<server1>,<server2>,...] <mfs_name>

See the Matrix Server Command Reference for information about the

arguments.

Delete a Matrix File Share

To remove a Matrix File Share, select it on the Servers or Applications

tab, right-click, and select Delete.

You can also enter the following at the Command Prompt:

mx mfs delete <mfs_name> ...

Display Status

The following command displays the status of a Matrix File Share.

mx mfs status [arguments] <mfs_name> ...

The arguments are:

[--up|--down]

[--enabled|--disabled]

[--active|--inactive]

Remove a Matrix File Share from a Server

This procedure removes the selected server from the configuration of the

Matrix File Share. Select the Matrix File Share on the Servers tab,

right-click, and select Remove From Server. (On the Applications tab,

right-click in the cell for the server from which the Matrix File Share is to

be deleted.)