3.4.0 Matrix Server Upgrade Guide

Chapter 2: Rolling Upgrades 11

Output from the utility appears on the screen and is also written to the

Application Log section of the Event Viewer. We recommend that you

fix any problems identified by mxcheck before you install Matrix

Server.

13. Install Matrix Server 3.4.0. Locate the file MxS_3.4.0.<xxxx>.msi on the

product CD or in the directory where you downloaded the software.

Double-click on the MxS_3.4.0.<xxxx>.msi file and run the Installation

Wizard. To complete the installation, reboot the server as directed by

the popup message.

14. Install the PolyServe Solution Packs.

– For MxDB for SQL Server, insert the Solution Pack CD into the CD

drive or go to the location where you have downloaded the

software. Then double click the file MxDB_SQL_3.4.x.<xxxx>.msi

and run the Installation Wizard.

– For MxFS for CIFS, insert the Solution Pack CD into the CD drive

or go to the location where you have downloaded the software.

Then double-click the file MxFS_3.4.0.<xxxx>.msi and run the

Installation Wizard.

15. Open the Matrix Server Connect window and enter the login

credentials for the server that you are upgrading. Click the down

arrow on the Connect button to see the options, and then click on

Configure.

16. Install the new license file. Select File > Configure, and then select

Change License File and install the new license.

17. Click Apply (on the bottom of the Matrix Configuration window) to

save the Matrix Server configuration.

NOTE: If the Apply fails, verify that the FC switch ports are enabled

for all of the servers. If the switch ports are enabled, check the

Windows Disk Management MMC snap-in to determine

whether the node can see the disks on the SAN. Also check the

HBA driver.