3.4.0 Matrix Server Release Notes

PolyServe Matrix Server Release Notes 32

Environment Issues

The following environment issues affect the operation of Matrix Server.

Compatibility Information

PolyServe is continually expanding its supported hardware and

operating system configurations. For the latest information, check the

PolyServe Web site:

http://www.polyserve.com

On the Web page, click on Support and then click on Compatibility.

Bug

Description

5571 Emulex HBAnyware fails to install

Matrix Server requires that the HBAnyware package be

installed on systems with Emulex HBAs. The HBAnyware

installation sometimes fails on Windows 2003 systems. If you

experience this problem, reboot the system and then retry the

installation.

7435 QLogic Switch login can cause Matrix Server failures

Matrix Server will not start if you are logged into a QLogic

FibreChannel switch and “admin start” is set.

If you log into the switch with “admin start” while Matrix

Server is running, this switch problem can affect fencing

operations and may cause the matrix to hang.

Workaround. Avoid putting the switch into “admin start” mode

while Matrix Server is running. If it is necessary to use this

mode while Matrix Server is running, limit the use of the mode

as much as possible.

7837 Content Indexing can cause ClusterPulse problems

The Content Indexing Service can cause ClusterPulse

connections to be dropped.

Workaround. Consider discontinuing the Content Indexing

Service.