3.4.0 Matrix Server Release Notes

PolyServe Matrix Server Release Notes 11

5807 Legato NetWorker volume shadow copy not supported

Matrix Server does not currently support the manner in which

Legato NetWorker 7.1.1 uses volume shadow copies. We

recommend that you configure NetWorker so that it will not use

shadow copies. One way to do this is to choose Options > Save

Options in the NetWorker client, and then type VSS:*=off in the

options box.

5838 Reinstalling Matrix Server with an evaluation license requires

new configuration

A Matrix Server configuration created with an evaluation

license cannot be used if Matrix Server is reinstalled with an

evaluation license. When uninstalling Matrix Server, do not

check the “Keep the existing Matrix Server configuration”

option. This option prohibits the use of the evaluation license

provided with the Matrix Server distribution.

5897 Built-in NT backup software fails on PSFS volumes when

volume shadow copy is enabled

Volume shadow copy is enabled by default in the built-in NT

backup software provided with Windows 2003. The PSFS

filesystem does not support volume shadow copies. If you want

to use the NT backup software on a PSFS volume, you will need

to disable volume shadow copy.

6364 Server’s IP address may change if assigned with DHCP

When DHCP or DHCP reservations are used to assign IP

addresses to servers, the IP address can change when the server

is rebooted. The DHCP server may be slow to respond to the

reboot, resulting in the server temporarily using a random

automatic IP address until the DHCP address is acquired. While

the server has the temporary address it will not be able to rejoin

the matrix, as Matrix Server expects the server to have the

DHCP address.

Bug

Description